31 came in - введение - in a flat groove. the deta

31_CAME IN - ВВЕДЕНИЕ - In a FLAT GROOVE.

THE DETAILED DRAWING of THAT BOARD. ON STAGES.

 The top Socket I have drawn and cut out proceeding from the experience and some set of Elements, that is peculiar to each carver and on features of a groove we, and I allocate the foremen, bottom - copy.!
DIFFERENCES.
From a hand-made article to a hand-made article that that in the approach to a groove varies. For example here I have replaced the Order in a groove. As a rule before I cut all Орнаментальную -Line a strip on Perimeter, and after Stage by stage заполонял by Elements internal space. At the left and in the bottom of the Large Top _Element- socket you see Веревочку -Element, but she was cut already after the Top Socket –Element- was cut out and on this the first Mistake has turned out. The top Locks elements in the top corners not by a rule are cut out.
For the Top Socket - Element, at the first stage were cut out Two – гранные –2X-line-Element- of a flute, that form six coal figure.
The bottom Socket –Element- was already cut by rules, that are fulfilled by centuries, and she has turned out and beautifully, and according to all laws of symmetry.

DIFFERENCE In FIGURE of SOCKETS.
If you understand Types a little Symmetry: -зеркальная-mirror, for example, when figure can be combined on floors and the Elements WILL BE LEFT! The top Socket –Удуьуте-can be combined only on a Longitudinal axis, and bottom, and it is a copy ancient прялки will develop on 8 axes. On perimeter here there is, for the Bottom Socket a chain from Лесенки -Element- from 2 or 3 elements, but Лесенка -Element-резана -cut-by a chain of Vertical and Horizontal flutes. On the previous page there is a figure of two boards and the Bottom Socket _Element-is very similar to the original, except for Small distinctions in diameters of Sockets and them половинок. As I cut out on the Bottom Socket on Strips -Веревочка-Element-above Сколышки, or from two numbers(lines) Сколышков a new Element - Веревочку, look for example groove on the Large diameter of the Top Socket-Element-, all strips around of Elements of the Bottom socket are executed Зубчиками-Element-. It not Лесенка-Element-, there between flutes ARE NO INTERVALS. Such reception is applied on many boards and, probably, was distributed in All territory of Russia. And not just on this board, and in this district.

OTHER ELEMENTS.

Are constructed the Central Socket-Element- is similar - at the centre of a small diameter, and from an External diameter 8 Sockets are drawn 4, 6,, that the Central Socket reaches.